Journey
Texts
|
|
 |
Switch No 1 (At B3 - Located on SOund I/O P.C. Board)
Function SW#1 SW#2 SW#3 SW#4 SW#5 SW#6 SW#7 SW8 SW#9 SW#10
XX XX XX XX XX XX
1 Coin Meter ON
** @ Coin Meters OFF
Upright/Mini ON
Cocktail Table OFF
**Coin Continue (On) ON
Coin Continue (Off) OFF
Freeze Video ON
**Normal Operation OFF
Switch No 3 (At D14 - Located On Sound I/O P.C. Board)
Function SW#1 SW#2 SW#3 SW#4
**Normal Operation OFF
Sound I/O Diag Mode ON
**Normal Operation OFF
RAM/ROM Test ON
Indicates Test Results
VIA YELLOW LED ON SOUND
I/O Board
FAST FLASH = BAD ROM
SLOW FLASH = BAD RAM
**Normal Operation OFF
Oscillator Test ON
**Normal Operation OFF
Filter Test ON
* No Effect If SW#1 of Switch NO. 3 Is In the OFF Position
** Factory Recommended Settings
XX Not Used
The remainder of the sames common option settings are conducted
during the MACHINE SETUP portion of the self-test mode.
RACK ADVANCE
1. Turn the power to the game on.
2. Open the coin door
NOTE: Cocktail Table Models Only
Gently pull out the plunger on the Safety Interlock
Switch located just inside the coin door
3. Using the Test Credit Button, put a credit on the game
4. Press the "1 Player" start button
5. IMMEDIATELY set the games Self-Test switch to
the ON position.
6. By pressing both the "1 Player" and " 2 Player" start buttons
at the same time (ONLY WHEN THE TRANSPORT SHIP IN THE CENTER
OF THE 5 PLANETS), the game will advance to the next rack.
7. When finsihed, set the Self-Test switch back to the OFF position
copyright