Fandt den her guide:
"If you do it my way the Original Xbox Controller will work 100% for sure every time & IT WILL BE RECOGNIZED EVERY TIME Windows boots up.
* 1. First You need the program " Driver Signature Enforcement Overrider ". (it's freeware)
* 2.Then you need to download & install the driver for a xbox2pc converter (The driver is for the Tiger Game XBox Controller)
You need to search Google for "PC018 super joy box 9" and chose the first link,, or just use this link below: ( It's freeware too)
CODE
Code:
http://www.mayflash.com/?Support/down/
* 3. You will be taken to the "MAYFLASH LIMITED" Site
* 4. Choose Download from the list on the Left-hand side & then download the driver listed as:
PC018 Super Joy Box 9
PC019 Super Joy Box 10 Oct., 22nd,2009 Windows Vista/Windows 7
PC020 Super Joy Box 11
(It lists three devices (Joy Box 9, 10, 11) but it's just one driver)
* 5. On the right you will see the download button
* 6. Once you have downloaded the Driver Signature Enforcement Overider & the Super Joy Box drivers place them in separate folders on your desktop
* 7. Now Run the Driver Signature Enforcement overider with admin privileges and enable test mode.
* 8. Reboot ( on reboot you will see an "In Test Mode watermark" in the lower Right hand corner of the screen) But don't worry because that watermark will be removed when we turn off Test Mode Later.
IMPORTANT NOTE: MAKE SURE YOU HAVE ALREADY STARTED "Driver Signature Enforcement Overrider" AND SET IT TO TEST MODE & REBOOTED BEFORE YOU INSTALL THE DOWNLOADED DRIVER.
Also make sure you choose RUN AS ADMINISTRATOR to install the driver
*9. Now Once you have installed the downloaded driver OPEN DIVER SIGNATURE ENFORCEMENT OVERRIDER ONCE MORE, ENABLE TEST MODE AND REBOOT AGAIN
* 10. Now plug in your Original XBOX controller
* 11. Windows 7 will detect it, but won't be able to install the driver & give an ERROR.
* 12. Go to My Computer / Properties & choose Device Manager from the list. You will see the the installed device under "Human Interface Devices" but it will have an exclamation mark because it has no drivers installed.
* 13. Double click on the device
* 14. Choose the driver Tab
* 15. Choose Update Drivers
* 16. Choose Select Browse my Computer for driver software
* 17. Choose Let me pick from a list of device drivers on my computer
Note: If it doesn't go straight to the Manufactures/Model Page first & takes you to a list of devices to install, do not worry, just choose the "Install Human Interface" heading from the list & then the driver loading page that we need to use will open, then continue as written below.
* 18. Un-tick the box "Show compatible hardware"
* 19. In the left panel under the heading Manufacturer Scroll Down the list & choose -> "TigerGame Limited" & in the right hand panel you will see the TigerGame Xbox Controller driver listed.
* 20. Click Next, Let windows do its thing & override any warnings & it will install the driver.
* 21. Go back into Device Manager and you will see that the yellow Exclamation mark is now gone & has been replaced with "TigerGame Xbox Controller.
* 22. Open the Driver Signature Enforcement Overrider once again & this time "DISABLE TEST MODE" & Reboot
* 23. Your Done, when Windows Reboots the watermark will be gone & Windows 7 will continue to Recognize the Original Xbox Controller.
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' '''''''''''''''''''''''''''''''''''''''''''''''''''
Question: How do you get analogue working on your Original XBOX Controller?
* 1. Open Control Panel
* 2. Choose devices & Printers
* 3. You will see TigerGame Xbox controller listed, Right click on it
* 4. Choose game Controller Settings
* 5. Now choose Properties
* 6. Click on controller mode and change it to analogue or Digital or in some cases Flight.
That's IT You will be able to play your games on Windows 7/Vista using your Xbox Controller without a hitch. Hope it helps you out!
Cheers
Bongo
NOTE: "If you haven't done so already" open Driver Signature Enforcement Overrider once more and disable Test Mode & Reboot"